Equip your cellar area to your dimensions, at your pace and in line with your needs. The BLOC CELLIER system is modular and lends itself to a variety of combinations... Thanks to their exclusive interlocking system, BLOC CELLIER units are easily stacked on any flat surface with no need for either glue or mortar.
RED CLAY or WHITE LIMESTONE
192.31
ex VATTTC
Manual, find your cellar fitting online
Make a diagram of your cellar.
Whatever the model, Bloc Cellier units are 40 cm wide and 20 cm deep. Only the height varies!
Depending on the available height, calculate the best arrangement.
A good cellar is a dark, enclosed place, away from vibration,noise and harmful odours(petrol, paint, etc.), protected from draughts but ventilated.
Ideal Temperature: between 11° and 16° and as stable as possible
Humidity Level: around 75%
Storage of bottles: Bottles laid horizontally fit perfectly onto a 20cm deep shelf, to prevent loss of space. They can be clearly seen in a pleasing arrangement of Bloc Cellier units which provide stable storage without vibration. Your cellar must be at the right temperature to conserve your wine. No storage unit can protect the wines against excessive temperatures even if they claim to be insulating.
All combinations, ranging from a simple cellar to one with more than 10,000 bottles, are possible with the 4 Bloc Cellier units.
Width : 240 cm
Height : 176 cm
Standard units : 5
Super units : 7
2/3 units : 12
Capacity : 407 bottles *
(*) Bordeaux Type
It is possible to achieve a combination with a vaulted or staircase profile by using a variety of units: Standard, Super, 2/3 and Mini.
Width : 240 cm
Height : 176 cm
Standard units : 5
Super units : 5
2/3 units : 5
Mini units : 1
Capacity : 278 bottles
For a "professional look" double stack, BLOC CELLIER units are assembled two by two (a depth of 40 cm) to increase storage capacity. A 4 x 4 x 20 cm wooden plank is required for this type of arrangement, as shown in the two sketches below.
Nothing is easier, to give your cellar an individual appearance, than to alternate ”Standard”, ”Super”, ”2/3” or ”Mini” units in a single or double alignment.
Assembling Maxi and 2/3 Standard
Assembling Half Maxi and 2/3 Standard
Assembling 2/3 and Half Maxi Standard
